10A Charge Controller Solar Battery Regulator 12-24V


£9.99 £25.20
You save: £15.21 (40%)
✔ Free delivery in UK Mainland

- 10A solar charge controller for 12V DC lamps, 12/24V batteries and solar panels

- Big LCD screen on front to show parameter display, battery volatge and battery type

- Fully automatic operation and electronic protection for charge/discharge, over temperatures and reverse polarity

- Dual USB 5V, 2A output connections on front

- Only suitable for lead acid batteries OPEN, AGM, GEL. Battery, panel and device must all be connected at all times

10A battery regulator controller for solar systems.

The solar charge controller helps run your system smoothly whether you are charging 12V batteries from a solar panel or running lights during the night.

For 10A 12V Pv System: 120W Solar Panel, 12V Lead-acid Battery, 21V for Max. Input Voltage.

For 10A 24V Pv System: 240W Solar Panel, 24V Lead-acid Battery, 42V for Max. Input Voltage.

The regulator must have all 3 connections from panel, battery and device at all times. If the connected battery is low is voltage, this may have an effect on the charge controller. If there is not sufficient battery power, the charge controller will not show any LED / screen will stay blank.

Note: The reverse order applies when deinstalling. An improper sequence order can damage the controller.


- Visual LCD graphic symbol
- Automatic identification system voltage level
- Adjustable charge-discharge control parametres
- Multiple selection of battery
- Battery low voltage protection
- Overload & short circuit protection
- Brief key operation
- Intelligent PWM charge mode
- Settable operating modes of load
- Battery over temperature protection
- Battery reverse polarity proctection
- With Dual USB 5V output
- Build-in micro controller digital accuracy
-Suitable for all 12/24V DC lamps


- Rated voltage: 12V/24V auto work (lead-acid battery)
- Max. charge and discharge current: 10A
- Max. solar input voltage: 50V
- Stop charge voltage: 14.7V / 29.4V
- Low voltage recovery: 12.2V / 24.4V
- Low voltage protection: 10.5V / 21.0V
- USB output current/voltage: 5V,  2A
- Operation Temperature: -20~+60
- Dimensions: 13.5 width, 7cm height, 3cm thickness

What you get

- 1x 10A Solar Charge Controller

Recently Viewed